网络转发命令及无格式数据设备支持网络格式转发命令，此格式中包含目标ip

网络转发命令及无格式数据
设备支持网络格式转发命令，此格式中包含目标ip和端口，音频设备不对数据进行处理，而是将其转发到网络上。
对于网络转发命令，音频设备不对该命令进行确认回应。回应的责任在数据接收端。此命令可用于与音频服务器，其他音频终端通信。如果转发命令的目标是其他音频设备，并且端口是预设的端口（UART0本地端口，可通过NAManager设置），设备接收到此数据帧后，立即将此数据加上源IP源端口一起发送到UART0上，如下图实线数据流向。通常的，串口设备B通过同样的方式，对串口设备A进行回应，如下图虚线所示数据流向。（PDU表示数据单元，不定长）

Kết quả (Anh) 2:

Network forward command and unformatted data
device forward command support network format, this format contains the target ip and port, the audio device does not process the data, but will forward it to the network.
For network forward command, the audio device does not respond to the command confirmation. Responsibility to respond to the data receiver. This command can be used with an audio server, other audio terminal communication. If the forward command's goal is to other audio devices, and the port is the default port (UART0 local port, can be NAManager setting), the device receives the data frame after this immediately with the source data sent with this IP source port to UART0 on, as shown by the solid line data flow. Typically, the serial device B in the same way, to respond to serial devices A, as shown by the dotted line data flow. (PDU indicates that the data unit, variable length)

Kết quả (Anh) 3:

Command and data forwarding network equipment support network
forward command format, the target IP and the port contains the format, data processing without audio equipment, it will be forwarded to the network.
for forwarding network command, the command does not confirm the response of audio equipment. The responsibility of the receiver in response to data. This command can be used with the audio server, other audio communication terminal. If the goal is to forward the command port and other audio equipment, is the default port (port UART0, can be set by NAManager), equipment receives the data frame,This will immediately add data source IP source port is sent to the UART0, such as the solid line data flow. Usually, the serial device B by the same way, to respond to the serial device A, the data flow is shown in dotted line. (PDU data unit, a variable length).